TOLL FREE800.284.6242

Insulation

Product Listing

Sort by
 Product
Spin-Glas® TC (yellow) and Spin-Glas® TC XG (white) insulation is an efficient thermal and acoustical blanket made from rotary-process glass fibers bonded with a thermosetting resin ideal for the rail and tank car industry. 

These resilient fiber glass blankets resist damage and are easily cut with a knife, shear, or steel rule die. The blankets do not contribute to or absorb odors and carry UL Fire Hazard Classification 25/50. The insulation readily conforms to curved and irregular shapes.814 SPIN GLAS 2"X24"X48"
ATLAS ISO 2.5" 4X4ATLAS ISO 2.5" 4X4
Duct Insulation                                                                 rFoil  Big-8 Duct Insulation                                                    - Consists of (2) layers of thick polyethylene                                    bubble pack reflective insulation separated                                   by 2-inch wide strips of bubble pack insulation                                 - R-Value 8                                                                     - Approved vapor barrier protection                                             - Inhibits condensation, mould and                                                fungi growth                                                                  - Improves HVAC system efficiency                                               - No foam corner spacer needed                                                  - Thermal performance unaffected by moisture                                    - Non-toxic and non-carcinogenicBUBBLE WRAP R8 48X50 BIG8
CARLISLE #306587CARLISLE TPR 25PSI Z PANEL 48'
Micro-Aire   Fiberglass Duct Board (MAD Board)                                   - Used to fabricate ducts for                                                     commercial and residential                                                    construction                                                                    - Airstream side features a black                                                 fiberglass mat                                                                - Exterior surface features a                                                     fire-resistant foil-scrim-kraft                                               facing extending the full width                                                 of the male edge to serve as an                                                 integral closure flap for section joints                                        - Molded with double-density, male female                                         edges for secure connections - Less air leakage compared to metal ducts                                      - Will not support microbial growth                                             - Maximum temperature: 250  F                                                    - Maximum air velocity: 5,000 fpm                                               - Noise reduction coefficient: 0.85 (R-6.5)                                     - Recycle content: 10%                                                          - Specification compliance:                                                     - ASTM E84                                                                      - NFPA 90A/90B                                                                  - Can/ULC S102-M88                                                              - ICC Compliant                                                                 - MEA# 237-86-M                                                                 - UL Listed- Quantity designation:                                                         - CT = Carton                                                                   - PT = Pallet                                                                     Type 800 Mat-Faced Micro-Aire   (Male/Female)                                  - Noise reduction coefficient:                                                  - 1-1/2" = 0.85                                                                 - 2" = 0.95DUCT BD PALJM 1-1/2X48X120 800
Micro-Aire   Fiberglass Duct Board (MAD Board)                                   - Used to fabricate ducts for                                                     commercial and residential                                                    construction                                                                    - Airstream side features a black                                                 fiberglass mat                                                                - Exterior surface features a                                                     fire-resistant foil-scrim-kraft                                               facing extending the full width                                                 of the male edge to serve as an                                                 integral closure flap for section joints                                        - Molded with double-density, male female                                         edges for secure connections - Less air leakage compared to metal ducts                                      - Will not support microbial growth                                             - Maximum temperature: 250  F                                                    - Maximum air velocity: 5,000 fpm                                               - Noise reduction coefficient: 0.85 (R-6.5)                                     - Recycle content: 10%                                                          - Specification compliance:                                                     - ASTM E84                                                                      - NFPA 90A/90B                                                                  - Can/ULC S102-M88                                                              - ICC Compliant                                                                 - MEA# 237-86-M                                                                 - UL Listed- Quantity designation:                                                         - CT = Carton                                                                   - PT = Pallet                                                                     Type 800 Mat-Faced Micro-Aire   (Male/Female)                                  - Noise reduction coefficient:                                                  - 1-1/2" = 0.85                                                                 - 2" = 0.95DUCT BOARD JM 1-1/2X48X120 800
Micro-Aire   Fiberglass Duct Board (MAD Board)                                   - Used to fabricate ducts for                                                     commercial and residential                                                    construction                                                                    - Airstream side features a black                                                 fiberglass mat                                                                - Exterior surface features a                                                     fire-resistant foil-scrim-kraft                                               facing extending the full width                                                 of the male edge to serve as an                                                 integral closure flap for section joints                                        - Molded with double-density, male female                                         edges for secure connections - Less air leakage compared to metal ducts                                      - Will not support microbial growth                                             - Maximum temperature: 250  F                                                    - Maximum air velocity: 5,000 fpm                                               - Noise reduction coefficient: 0.85 (R-6.5)                                     - Recycle content: 10%                                                          - Specification compliance:                                                     - ASTM E84                                                                      - NFPA 90A/90B                                                                  - Can/ULC S102-M88                                                              - ICC Compliant                                                                 - MEA# 237-86-M                                                                 - UL Listed- Quantity designation:                                                         - CT = Carton                                                                   - PT = Pallet                                                                     Type 475 Mat-Faced Micro-Aire   (Male/Female)                                  - Noise reduction coefficient: 0.70DUCT BOARD JM 1X48X120 475
DUCT BOARD JM 1X48X96 475DUCT BOARD JM 1X48X96 475
Micro-Aire   Fiberglass Duct Board (MAD Board)                                   - Used to fabricate ducts for                                                     commercial and residential                                                    construction                                                                    - Airstream side features a black                                                 fiberglass mat                                                                - Exterior surface features a                                                     fire-resistant foil-scrim-kraft                                               facing extending the full width                                                 of the male edge to serve as an                                                 integral closure flap for section joints                                        - Molded with double-density, male female                                         edges for secure connections - Less air leakage compared to metal ducts                                      - Will not support microbial growth                                             - Maximum temperature: 250  F                                                    - Maximum air velocity: 5,000 fpm                                               - Noise reduction coefficient: 0.85 (R-6.5)                                     - Recycle content: 10%                                                          - Specification compliance:                                                     - ASTM E84                                                                      - NFPA 90A/90B                                                                  - Can/ULC S102-M88                                                              - ICC Compliant                                                                 - MEA# 237-86-M                                                                 - UL Listed- Quantity designation:                                                         - CT = Carton                                                                   - PT = Pallet                                                                     Type 800 Mat-Faced Micro-Aire   (Male/Female)                                  - Noise reduction coefficient:                                                  - 1-1/2" = 0.85                                                                 - 2" = 0.95DUCT BOARD JM 2X48X120 800
Micro-Aire   Fiberglass Duct Board (MAD Board)                                   - Used to fabricate ducts for                                                     commercial and residential                                                    construction                                                                    - Airstream side features a black                                                 fiberglass mat                                                                - Exterior surface features a                                                     fire-resistant foil-scrim-kraft                                               facing extending the full width                                                 of the male edge to serve as an                                                 integral closure flap for section joints                                        - Molded with double-density, male female                                         edges for secure connections - Less air leakage compared to metal ducts                                      - Will not support microbial growth                                             - Maximum temperature: 250  F                                                    - Maximum air velocity: 5,000 fpm                                               - Noise reduction coefficient: 0.85 (R-6.5)                                     - Recycle content: 10%                                                          - Specification compliance:                                                     - ASTM E84                                                                      - NFPA 90A/90B                                                                  - Can/ULC S102-M88                                                              - ICC Compliant                                                                 - MEA# 237-86-M                                                                 - UL Listed- Quantity designation:                                                         - CT = Carton                                                                   - PT = Pallet                                                                     Type 475 Mat-Faced Micro-Aire   (Male/Female)                                  - Noise reduction coefficient: 0.70DUCT BOARD PAL JM 1X48X120 475
Micro-Aire   Fiberglass Duct Board (MAD Board)                                   - Used to fabricate ducts for                                                     commercial and residential                                                    construction                                                                    - Airstream side features a black                                                 fiberglass mat                                                                - Exterior surface features a                                                     fire-resistant foil-scrim-kraft                                               facing extending the full width                                                 of the male edge to serve as an                                                 integral closure flap for section joints                                        - Molded with double-density, male female                                         edges for secure connections - Less air leakage compared to metal ducts                                      - Will not support microbial growth                                             - Maximum temperature: 250  F                                                    - Maximum air velocity: 5,000 fpm                                               - Noise reduction coefficient: 0.85 (R-6.5)                                     - Recycle content: 10%                                                          - Specification compliance:                                                     - ASTM E84                                                                      - NFPA 90A/90B                                                                  - Can/ULC S102-M88                                                              - ICC Compliant                                                                 - MEA# 237-86-M                                                                 - UL Listed- Quantity designation:                                                         - CT = Carton                                                                   - PT = Pallet                                                                     Type 800 Mat-Faced Micro-Aire   (Male/Female)                                  - Noise reduction coefficient:                                                  - 1-1/2" = 0.85                                                                 - 2" = 0.95

Pallet Qty=22DUCT BOARD PAL JM 2X48X120 800
DUCT BOARD PAL JM 2X48X120 BEDUCT BOARD PAL JM 2X48X120 BE
JM SPIRA 1.5X48X120-VSD PALLETJM SPIRA 1.5X48X120-VSD PALLET
JM SPIRA 1X48X120 LD PALLETJM SPIRA 1X48X120 LD PALLET
JM SPIRA 1X48X120-VSD PALLETJM SPIRA 1X48X120-VSD PALLET
JM SPIRACOUSTIC 1.5X48X120 VSDJM SPIRACOUSTIC 1.5X48X120 VSD
JM SPIRACOUSTIC 1X48X120 VVSDJM SPIRACOUSTIC 1X48X120 VVSD
Spiracoustic Plus   Spiral Fiberglass Duct Liner                                 - Evenly-spaced kerfs allows                                                      material to conform to the                                                    inside diameter of spiral                                                       ducts                                                                           - Surface coated with Permacote                                                    coating which provides a                                                      durable surface and added                                                       protection against microbial growth                                             - Exterior surface is laminated with a                                            fire-resistant FSK facing                                                     - NRC: 0.85 (R-6)                                                               - Dust and dirt-resistant - Maximum temperature: 250  F                                                    - Maximum air velocity: 6,000 fpm                                               - Recycled content: 20%                                                         - Specification compliance:                                                     - ASTM C1071 Air Erosion Test/UL181                                             - ASTM G21 and G22                                                              - ASTM E84, FHC 25/50                                                           - NFPA 90A and 90B                                                              - ASTM D5116-State of Washington                                                - Conforms to ASHRAE 62                                                         - ULC S102-M88                                                                  - Greenguard Certified                                                          - Quantity designation:- CT = Carton                                                                   - PT = Pallet                                                                     LD Large Diameter Spiracoustic Plus                                            - Snap-in installation                                                          - For 32" metal ducts and up                                                    - Noise reduction coefficient: 0.75JM SPIRACOUSTIC+ 1X48X120 LD
Spiracoustic Plus   Spiral Fiberglass Duct Liner                                 - Evenly-spaced kerfs allows                                                      material to conform to the                                                    inside diameter of spiral                                                       ducts                                                                           - Surface coated with Permacote                                                    coating which provides a                                                      durable surface and added                                                       protection against microbial growth                                             - Exterior surface is laminated with a                                            fire-resistant FSK facing                                                     - NRC: 0.85 (R-6)                                                               - Dust and dirt-resistant - Maximum temperature: 250  F                                                    - Maximum air velocity: 6,000 fpm                                               - Recycled content: 20%                                                         - Specification compliance:                                                     - ASTM C1071 Air Erosion Test/UL181                                             - ASTM G21 and G22                                                              - ASTM E84, FHC 25/50                                                           - NFPA 90A and 90B                                                              - ASTM D5116-State of Washington                                                - Conforms to ASHRAE 62                                                         - ULC S102-M88                                                                  - Greenguard Certified                                                          - Quantity designation:- CT = Carton                                                                   - PT = Pallet                                                                     SD Small Diameter Spiracoustic Plus                                            - Snap-in installation                                                          - For 18" - 58" metal ducts                                                     - Noise reduction coefficient: 0.75JM SPIRACOUSTIC+ 1X48X120 SD
Spiracoustic Plus   Spiral Fiberglass Duct Liner                                 - Evenly-spaced kerfs allows                                                      material to conform to the                                                    inside diameter of spiral                                                       ducts                                                                           - Surface coated with Permacote                                                    coating which provides a                                                      durable surface and added                                                       protection against microbial growth                                             - Exterior surface is laminated with a                                            fire-resistant FSK facing                                                     - NRC: 0.85 (R-6)                                                               - Dust and dirt-resistant - Maximum temperature: 250  F                                                    - Maximum air velocity: 6,000 fpm                                               - Recycled content: 20%                                                         - Specification compliance:                                                     - ASTM C1071 Air Erosion Test/UL181                                             - ASTM G21 and G22                                                              - ASTM E84, FHC 25/50                                                           - NFPA 90A and 90B                                                              - ASTM D5116-State of Washington                                                - Conforms to ASHRAE 62                                                         - ULC S102-M88                                                                  - Greenguard Certified                                                          - Quantity designation:- CT = Carton                                                                   - PT = Pallet                                                                     VSD Very Small Diameter Spiracoustic Plus                                      - Slip-fit installation                                                         - For 8" - 22" metal ducts                                                      - Noise reduction coefficient: 0.75JM SPIRACOUSTIC+ 1X48X120-VSD
The XSPECT® ISOfoam APF board is a closed-cell polyisocyanurate foam core bonded to a foil facer on both sides. It is a highly versatile insulation that can be used in a variety of mechanical and OEM applications, including rooftop ducts, appliances, HVAC equipment, refrigerated transportation, storage vessels, and railcars.

XSPECT ISOfoam APF board offers one of the highest R-values of any rigid insulation available, making it ideal for both hot and cold applications. The foil facer on the insulation operates as an excellent vapor-retarder, working in tandem with the closed cell foam to contribute to a tightly sealed system. Additionally, the lightweight foam makes it easy to fabricate and install.JM XSPECT ISOFOAM APF 1.5" 4X8
KFLEX 1-1/2"X59X35 NON PSAKFLEX 1-1/2"X59X35 NON PSA
KFLEX 1/2"X59X100 NON PSA LNRKFLEX 1/2"X59X100 NON PSA LNR
KFLEX 1X59X50 NON PSA LINERKFLEX 1X59X50 NON PSA LINER

Showing 1 - 24 of 112 Results